Investigation of a rotor blade with tip cooling subject to a nonuniform temperature profile


Kahveci H. S.

Journal of Turbomachinery, vol.143, no.7, 2021 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 143 Issue: 7
  • Publication Date: 2021
  • Doi Number: 10.1115/1.4050332
  • Journal Name: Journal of Turbomachinery
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aerospace Database, Applied Science & Technology Source, Communication Abstracts, Compendex, Computer & Applied Sciences, INSPEC, Metadex, DIALNET, Civil Engineering Abstracts
  • Keywords: computational fluid dynamics (CFD), heat transfer and film cooling, temperature profile, pressure loss, THERMAL PERFORMANCE, REDISTRIBUTION
  • Middle East Technical University Affiliated: Yes

Abstract

© 2021 by ASME.One of the challenges in the design of a high-pressure turbine blade is that a considerable amount of cooling is required so that the blade can survive high temperature levels during engine operation. Another challenge is that the addition of cooling should not adversely affect blade aerodynamic performance. The typical flat tips used in designs have evolved into squealer form that implements rims on the tip, which has been reported in several studies to achieve better heat transfer characteristics as well as to decrease pressure losses at the tip. This paper demonstrates a numerical study focusing on a squealer turbine blade tip that is operating in a turbine environment matching the typical design ratios of pressure, temperature, and coolant blowing. The blades rotate at a realistic rpm and are subjected to a turbine rotor inlet temperature profile that has a nonuniform shape. For comparison, a uniform profile is also considered as it is typically used in computational studies for simplicity. The effect of tip cooling is investigated by implementing seven holes on the tip near the blade pressure side. Results confirm that the temperature profile nonuniformity and the addition of cooling are the drivers for loss generation, and they further increase losses when combined. Temperature profile migration is not pronounced with a uniform profile but shows distinct features with a nonuniform profile for which hot gas migration toward the blade pressure side is observed. The blade tip also receives higher coolant coverage when subject to the nonuniform profile.