DSC study on combustion and pyrolysis behaviors of Turkish crude oils


KÖK M. V., Gundogar A. S.

FUEL PROCESSING TECHNOLOGY, cilt.116, ss.110-115, 2013 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 116
  • Basım Tarihi: 2013
  • Doi Numarası: 10.1016/j.fuproc.2013.05.001
  • Dergi Adı: FUEL PROCESSING TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.110-115
  • Anahtar Kelimeler: Differential scanning calorimetry, Crude oil, Reaction kinetics, Combustion, Pyrolysis, DIFFERENTIAL SCANNING CALORIMETRY, THERMAL-BEHAVIOR, KINETICS, OXIDATION, THERMOGRAVIMETRY, FRACTIONS, RECOVERY, CRACKING
  • Orta Doğu Teknik Üniversitesi Adresli: Evet

Özet

This study focused on the investigation of non-isothermal thermal behavior and kinetics of Turkish crude oils under combustion and pyrolysis conditions using differential scanning calorimetry (DSC). On DSC combustion curves, two exothermic oxidation regions were detected known as low temperature (LTO) and high temperature oxidation (HTO). Again, two distinct reaction regions were revealed under pyrolysis conditions and DSC curves exhibited endothermic behavior for both the distillation and cracking regions. In consequence of thermal analyses, the heat of reaction amount was related to the degrees API gravity and accordingly to the asphaltene content of crude oils. It was proved that, with the decrease in degrees API gravity of crude oil, its heat release during HTO and heat requirement for cracking reaction increase. Experimental results showed that the reaction temperature intervals, peak temperatures and heat flows shifted to greater degrees for higher heating rates. With the application of ASTM I-II and Roger & Morris kinetic methods, it was observed that heavier oils with higher asphaltene content had greater activation energy and Arrhenius constant values. (C) 2013 Elsevier B.V. All rights reserved.