Investigation of doped and undoped VOxfilms for terahertz microbolometer applications


Atik B., Dirican E., Demirörs O., ALTAN H., ESENTÜRK O., Ylldlrlm M., ...Daha Fazla

Terahertz Emitters, Receivers, and Applications XII 2021, California, Amerika Birleşik Devletleri, 1 - 05 Ağustos 2021, cilt.11827 identifier

  • Yayın Türü: Bildiri / Tam Metin Bildiri
  • Cilt numarası: 11827
  • Doi Numarası: 10.1117/12.2594145
  • Basıldığı Şehir: California
  • Basıldığı Ülke: Amerika Birleşik Devletleri
  • Anahtar Kelimeler: Microbolometer, sputtering, TCR, temperature sensitive material, THz, VOx, W doping
  • Orta Doğu Teknik Üniversitesi Adresli: Evet

Özet

© 2021 SPIE.The microbolometer technology has proved its potential in the Infrared (IR) region due to its low fabrication costs, and room temperature operation, making this technology desirable to be used in various applications, and this interest has recently expanded into the Terahertz (THz) region as well. The detection in microbolometers is achieved through the absorption of THz radiation which subsequently heats up and is sensed by the temperature sensitive material at the core of the device. This temperature sensitive material is typically based on VOx, which exhibits a sufficient change in resistance with temperature. While this temperature sensitive material is useful in the IR, the low energy of the THz wave compared to the background radiation makes it a challenge to operate the device at room temperature and show a large change in resistance with respect to the slight change in temperature. Metal doped VOx films can show a better performance however these effects are not well understood in the THz region. In this study, Tungsten (W) doped and undoped VOx films are fabricated and then analyzed using Time Domain THz Spectroscopy. The DC electrical properties of the films as well as their optical behaviors in the region of 0.2-2.0 THz are analyzed as a function of temperature. The metal doping is seen to affect the overall electrical and optical response of the film. Understanding this dependence is key to achieving a better film for applications in the THz region.