Fabrication of A Sandwich Type Three Axis Capacitive MEMS Accelerometer


Tez S., Akın T.

12th IEEE Sensors Conference, Maryland, Amerika Birleşik Devletleri, 3 - 06 Kasım 2013, ss.1863-1866 identifier

  • Yayın Türü: Bildiri / Tam Metin Bildiri
  • Basıldığı Şehir: Maryland
  • Basıldığı Ülke: Amerika Birleşik Devletleri
  • Sayfa Sayıları: ss.1863-1866
  • Orta Doğu Teknik Üniversitesi Adresli: Evet

Özet

This paper presents a three axis capacitive MEMS accelerometer including individual lateral and vertical accelerometers in a same die. The three axis capacitive MEMS accelerometer is fabricated by utilizing a glass-silicon-glass multi-stack formed by a fabrication process depending on the double glass modified silicon on glass process (DGM-SOG), where the structural layer is selected to be 35 mu m thick < 111 > silicon. The fabrication process uses the Au-Si eutectic bonding in the last step of the formation of the glass-silicon-glass multi-stack, eliminating the stiction risk of the suspended silicon structures to the top glass with the voltage free feature of the Au-Si eutectic bonding method, allowing to implement 2 mu m capacitive gaps for the vertical accelerometers without any pull in during fabrication, while matching 2 mu m capacitive gaps of the lateral accelerometers. The top glass wafer allows implementing not only a top electrode for the vertical accelerometer, but also a cap for the entire structure. The fabricated three axis MEMS capacitive accelerometer die is 12x7x1 mm(3). Measured capacitances of the lateral and the vertical accelerometers are 9.4 pF and 7.4 pF, but their capacitance change is similar to each other, as they are approximately measured as 90 fF/V and 100 fF/V, respectively. The Brownian noise of the lateral and vertical are estimated to be 6 mu g/root Hz and 7.6 mu g/root Hz, respectively.