Yayınlar & Eserler

ATLAS Yayın Analitiği
Makaleler 14
Tümü (14)
SCI-E, SSCI, AHCI (14)
SCI-E, SSCI, AHCI, ESCI (14)
Scopus (14)

1. Capacitor sizing of three-level neutral point clamped voltage source inverter for electric vehicles: Effects of modulation and motor characteristics

OGAN S. E., BOSTANCI E.
IET Power Electronics , cilt.17, sa.9, ss.1051-1066, 2024 (SCI-Expanded, Scopus)

2. Optimum Placement of High Energy Inductors for Capacitive Pulsed Power Supplies of Electromagnetic Launchers

Gungen I., BOSTANCI E.
IEEE Transactions on Plasma Science , cilt.51, sa.9, ss.2717-2725, 2023 (SCI-Expanded, Scopus)

3. High-Performance Vernier Machines with Halbach Array Permanent Magnets for Direct Drive Applications

Allahyari A., BOSTANCI E., Mahmoudi A.
MACHINES , cilt.11, sa.5, 2023 (SCI-Expanded, Scopus)

4. Switched reluctance motors and drive systems for electric vehicle powertrains: State of the art analysis and future trends

Lan Y., Benomar Y., Deepak K., AKSÖZ A., Baghdadi M. E., BOSTANCI E., et al.
Energies , cilt.14, sa.8, 2021 (SCI-Expanded, Scopus)

5. A Stray Magnetic Flux-Based Robust Diagnosis Method for Detection and Location of Interturn Short Circuit Fault in PMSM

Gurusamy V., Bostancı E., Li C., Qi Y., Akin B.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT , cilt.70, 2021 (SCI-Expanded, Scopus)

6. Severity Estimation of Interturn Short Circuit Fault for PMSM

Qi Y., Bostancı E., Zafarani M., Akin B.
IEEE Transactions on Industrial Electronics , cilt.66, ss.7260-7269, 2019 (SCI-Expanded, Scopus)

7. Interturn short-circuit faults in permanent magnet synchronous machines: An extended review and comprehensive analysis

Zafarani M., Bostanci E., Qi Y., Göktaş T., Akin B.
IEEE Journal of Emerging and Selected Topics in Power Electronics , cilt.6, ss.2173-2191, 2018 (SCI-Expanded, Scopus)

8. A Comprehensive Analysis of Short-Circuit Current Behavior in PMSM Interturn Short-Circuit Faults

Qi Y., Bostanci E., Gurusamy V., Akin B.
IEEE Transactions on Power Electronics , cilt.33, ss.10784-10793, 2018 (SCI-Expanded, Scopus)

9. Comprehensive Report on Design and Development of a 100-kW DSSRM

Maharjan L., Bostanci E., Wang S., Cosoroaba E., Cai W., Yi F., et al.
IEEE Transactions on Transportation Electrification , cilt.4, ss.835-856, 2018 (SCI-Expanded, Scopus)

10. Comparison of winding configurations in double-stator switched reluctance machines

Cosoroaba E., Bostanci E., Li Y., Wang W., Fahimi B.
IET Electric Power Applications , cilt.11, sa.8, ss.1407-1415, 2017 (SCI-Expanded, Scopus)

11. Opportunities and Challenges of Switched Reluctance Motor Drives for Electric Propulsion: A Comparative Study

Bostanci E., Moallem M., Parsapour A., Fahimi B.
IEEE Transactions on Transportation Electrification , cilt.3, ss.58-75, 2017 (SCI-Expanded, Scopus)

12. Influence of Phase Magnetic Couplings on Phase Current Characteristics of Multiphase BLDC Machines with Overlapping Phase Windings

Bostanci E., Neuschl Z., Plikat R.
IEEE Transactions on Magnetics , cilt.51, 2015 (SCI-Expanded, Scopus)

13. Optimum design of a fuel-cell powertrain based on multiple design criteria

Sarioglu I. L., Czapnik B., Bostanci E., Klein O. P., Schröder H., Küçükay F.
Journal of Power Sources , cilt.266, ss.7-21, 2014 (SCI-Expanded, Scopus)

14. No-load performance analysis of brushless DC machines with axially displaceable rotor

Bostanci E., Neuschl Z., Plikat R., Ponick B.
IEEE Transactions on Industrial Electronics , cilt.61, ss.1692-1699, 2014 (SCI-Expanded, Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 14

1. Optimizing an Interior-Permanent-Magnet Tooth-Coil-Winding Traction Motor for its Entire Operating Range

Allahyari A., BOSTANCI ÖZKAN E., Odabas G., Lind P., Aarniovuori L., Pyrhonen J.
2024 International Conference on Electrical Machines, ICEM 2024, Torino, İtalya, 1 - 04 Eylül 2024, (Tam Metin Bildiri)

2. Effects of Maximum Speed on Output Characteristics of IPMSMs in EV Applications: A Comparative Study

Rezapour P., Yılmaz Y. B., Bostancı Özkan E.
2023 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2023 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), İstanbul, Türkiye, 1 - 02 Eylül 2023, cilt.1, ss.1-9, (Tam Metin Bildiri)

3. Optimal Battery Sizing for Electric Vehicles Considering Battery Ageing

Gezer A., Ünver B. Z., Bostancı E.
11th IEEE International Conference on Renewable Energy Research and Applications, ICRERA 2022, İstanbul, Türkiye, 18 - 21 Eylül 2022, ss.82-89, (Tam Metin Bildiri)

4. Parameter Estimation of Electric Vehicles for Improved Range Prediction

Saglam B., BOSTANCI E., GÖL M.
11th IEEE PES Innovative Smart Grid Technologies Europe, ISGT Europe 2021, Espoo, Finlandiya, 18 - 21 Ekim 2021, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

5. Effects of Rotor Flux Barrier Design on Torque Ripple and High Speed Performance of Synchronous Reluctance Machines

Yılmaz Y. B., Bostancı E.
2020 International Conference on Electrical Machines (ICEM), Gothenburg, İsveç, 23 - 26 Ağustos 2020, ss.448-454, (Tam Metin Bildiri)

6. Comparison of Two-Level and Three-Level NPC Inverter Topologies for a PMSM Drive for Electric Vehicle Applications

Madan A., Bostancı E.
International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) / International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), İstanbul, Türkiye, 27 - 29 Ağustos 2019, ss.147-154, (Tam Metin Bildiri)

7. Field Weakening Methods for Axially Displaceable Brushless DC Machines

Bostancı E.
23rd International Conference on Electrical Machines, ICEM 2018, Alexandroupoli, Yunanistan, 3 - 06 Eylül 2018, ss.2171-2177, (Tam Metin Bildiri)

8. Optimal design of synchronous reluctance machines

Kiani M., Bostanci E., Fahimi B.
43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017, Beijing, Çin, 29 Ekim - 01 Kasım 2017, ss.3749-3753, (Tam Metin Bildiri)

9. On the proximity effects of high-energy magnets on M-19 magnetic steel core

Jayasankar S., Maharjan L., Cosoroaba E., Bostanci E., Fahimi B.
2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Florida, Amerika Birleşik Devletleri, 21 - 24 Mayıs 2017, (Tam Metin Bildiri)

10. Performance improvement and comparison of concentrated winding segmental rotor and double stator switched reluctance machines

Bostanci E., Gu L., Cosoroaba E., Moallem M., Fahimi B.
17th Biennial IEEE Conference on Electromagnetic Field Computation, IEEE CEFC 2016, Florida, Amerika Birleşik Devletleri, 13 - 16 Kasım 2016, (Tam Metin Bildiri)

11. Temperature estimation of switched reluctance machines using thermal impulse response technique

Rahman N. A., Gu L., Bostanci E., Fahimi B.
17th Biennial IEEE Conference on Electromagnetic Field Computation, IEEE CEFC 2016, Florida, Amerika Birleşik Devletleri, 13 - 16 Kasım 2016, (Tam Metin Bildiri)

12. Thermal analysis of switched reluctance motor with direct in-winding cooling system

Rahman N. A., Bostanci E., Fahimi B.
17th Biennial IEEE Conference on Electromagnetic Field Computation, IEEE CEFC 2016, Florida, Amerika Birleşik Devletleri, 13 - 16 Kasım 2016, (Tam Metin Bildiri)

13. Analytical calculation of the electromagnetic field in SRM using conformal mapping method

Gu L., Bostanci E., Moallem M., Wang S., Devendra P.
2016 IEEE Transportation Electrification Conference and Expo, ITEC 2016, Michigan, Amerika Birleşik Devletleri, 27 - 29 Haziran 2016, (Tam Metin Bildiri)

14. Extended field reconstruction method for modeling of interior permanent magnet synchronous machines

Gu L., Moallem M., Bostanci E., Wang S., Devendra P.
2016 IEEE Transportation Electrification Conference and Expo, ITEC 2016, Michigan, Amerika Birleşik Devletleri, 27 - 29 Haziran 2016, (Tam Metin Bildiri)
Metrikler

Yayın

29

Yayın (WoS)

19

Yayın (Scopus)

28

Atıf (WoS)

964

H-İndeks (WoS)

10

Atıf (Scopus)

1321

H-İndeks (Scopus)

12

Atıf (Scholar)

3

H-İndeks (Scholar)

1

Proje

7

Fikri Mülkiyet

1

Tez Danışmanlığı

12

Açık Erişim

11
BM Sürdürülebilir Kalkınma Amaçları
SDG 7: AMAÇ 7: ERİŞİLEBİLİR VE TEMİZ ENERJİ