Ramjet uygulamaları için boru bağlantılı test düzeneği tasarımı


Tezin Türü: Yüksek Lisans

Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği Bölümü, Türkiye

Tezin Onay Tarihi: 2005

Tezin Dili: İngilizce

Öğrenci: Mustafa Nevzat Sarışın

Danışman: ABDULLAH ULAŞ

Özet:

Development of the combustor of a ramjet can be achieved by connected pipe testing. Connected pipe testing is selected for combustor testing because pressure, temperature, Mach number, air mass flow rate can be simulated by this type of testing. Real time trajectory conditions and transition from rocket motor (booster) to ramjet operation can also be tested. The biggest advantage of connected pipe testing is the low operation cost and simplicity. Air mass flow rate requirement is less than the others which requires less air storage space and some components like supersonic nozzle and ejector system is not necessary. In this thesis, design of a connected pipe test facility is implemented. Three main systems are analyzed; air storage system, air heater system and test stand. Design of air storage system includes the design of pressure vessel and pressure & flow regulation system. Pressure and flow regulation system is needed to obtain the actual flow properties that the combustor is exposed to during missile flight. Alternatives for pressure and air mass flow rate regulation are considered in this study. Air storage system designed in this thesis is 27.8 m3 at 50 bar which allows a test duration of 200 seconds at an average mass flow rate of 3 kg/s. Air heater system is utilized to heat the air to simulate the aerodynamic heating of the inlet. Several different combustion chamber configurations with different flame holding mechanisms are studied. The most efficient configuration is selected for this study. Combustion analysis of the air heater is performed by FLUENT CFD Code. Combustion process and air heater designs are validated using experimental data. Designed air heater system is capable of supplying air at a temperature range of 400-1000 K and mass flow rate range of 1.5-8 kg/s at Mach numbers between 0.1-0.5 and pressure between 2-8 bar. Finally the design of the