Katkılı çimento için basınç dayanım deney yöntemlerinin karşılaştırlması.


Tezin Türü: Yüksek Lisans

Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Türkiye

Tezin Onay Tarihi: 2010

Tezin Dili: İngilizce

Öğrenci: Elçin Ülker

Eş Danışman: İSMAİL ÖZGÜR YAMAN, ABDULLAH ÖZTÜRK

Özet:

The aim of this thesis is to twofold, in order to demonstrate the variabilities that can be faced within the compressive strength of blended cements, one blended cement namely CEM IV / B (P-V) 32.5N is selected and the 28-day compressive strength is obtained by 16 different laboratories following TS EN 196-1 standard. Later, to show the variabilities that could be faced by different standards, three different cement types were selected and their compressive strengths are determined following two procedures first with TS EN 196-1, later with similar procedure described in ASTM. The strength of cement is determined by TS EN 196-1 in Turkey that is the same for all types of cements. However, American cement producers use different standards for testing the strength of Portland cement and blended cements. The main difference is the amount of water utilized in producing the cement mortar. It was observed that for Portland and Portland composite cements; there is not any significant difference in between the compressive strength results of cement mortars prepared by both methods. However, for pozzolanic cements, there is much deviance in the compressive strength results of cement mortars prepared by TS EN 196-1.